We offer free standard shipping Australia-wide for all orders over $100! Thanks for supporting Aussie businesses!

Victron MultiPlus-II Inverter & SLA/LiFePO4 Charger 48V 8000VA 110A PMP482805000

$4,599.00

Product in Stock

Description

Model No VEICMPII-48/8000/110-100/100
Description
MultiPlus-II Inverter & SLA/LiFePO4 Charger 48V 8000VA 110A PMP482805000
Original Brand Victron Energy PMP482805000
Chemistry Lithium Iron Phosphate / Lead Acid (LiFePO4/SLA)
Voltage 48V
Size 110A
Width 363mm
Height 642mm
Length/Breadth/Depth 206mm
Weight 42000g
A MultiPlus, plus ESS (Energy Storage System) functionality
The MultiPlus-II is a multifunctional inverter/charger with all the features of the MultiPlus, plus an external current sensor option which extends the PowerControl and PowerAssist function to 50A resp. 100A.
The MultiPlus-II is ideally suited for professional marine, yachting, vehicle and land based off-grid applications. It also has built-in anti-islanding functionality, and an increasingly long list of country approvals for ESS application. Several system configurations are possible. For more detailed information see the ESS Design and configuration manual.


PowerControl and PowerAssist – Boosting the capacity of the grid or a generator
A maximum grid or generator current can be set. The MultiPlus-II will then take account of other AC loads and use whatever is extra for battery charging, thus preventing the generator or grid from being overloaded (PowerControl function).
PowerAssist takes the principle of PowerControl to a further dimension. Where peak power is so often required only for a limited period, the MultiPlus-II will compensate insufficient generator, shore or grid power with power from the battery. When the load reduces, the spare power is used to recharge the battery.


Solar energy: AC power available even during a grid failure
The MultiPlus-II can be used in off grid as well as grid connected PV and other alternative energy systems. It is compatible with both solar charger controllers and grid-tie inverters.


Two AC Outputs
The main output has no break functionality. The MultiPlus-II takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption.
The second output is live only when AC is available on the input of the MultiPlus-II. Loads that should not discharge the battery, like a water heater for example, can be connected to this output.


Virtually unlimited power thanks to parallel and three phase operation (not available for the 8k and 10k models)
Up to 6 Multis can operate in parallel to achieve higher power output. Six 48/5000/70 units, for example, will provide 25 kW / 30 kVA output power with 420 Amps charging capacity.
In addition to parallel connection, three units of the same model can be configured for three phase output. But thatโ€™s not all: up to 6 sets of three units can be parallel connected for a 75 kW / 90 kVA inverter and more than 1200 Amps charging capacity.


On-site system configuring, monitoring and control
Settings can be changed in a matter of minutes with VEConfigure software (computer or laptop and MK3-USB interface needed).
Several monitoring and control options are available: Cerbo GX, Color Control GX, Venus GX, Octo GX, CANvu GX, laptop, computer, Bluetooth (with the optional VE.Bus Smart dongle), Battery Monitor, Digital Multi Control Panel.


Remote configuring and monitoring
Install a Cerbo GX or other GX product to connect to the internet.
Operational data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge. When connected to the internet, systems can be accessed remotely, and settings can be changed.

 

 

ddiy icon INSTALLATION TO AUSTRALIAN STANDARDS REQUIRED

  • This product requires installation to the appropriate Australian Standards
  • Various State legislations require a Licenced Electrician to install this item – Please consult your State Government websites for more information
  • QLD Legislation imposes Point of Sale signage regulations for this product


For more information regarding the Victron MultiPlus-II Inverter & SLA/LiFePO4 Charger 48V 8000VA 110A PMP482805000 please contact us via any of the methods available here or message us on social media and we’ll be happy to assist!

Victron MultiPlus-II Inverter & SLA/LiFePO4 Charger 48V 8000VA 110A PMP482805000

0
    0
    Your Cart
    Your cart is empty