Description
| Model No |
VEICMP-48/500/6-16 |
| Description |
MultiPlus Inverter & SLA/LiFePO4 Charger 48V 500VA 6A -16A Transfer Switch PMP481500000
|
| Original Brand |
Victron Energy PMP481500000 |
| Chemistry |
Lithium Iron Phosphate / Lead Acid (LiFePO4/SLA) |
| Voltage |
48V |
| Size |
6A |
| Width |
182mm |
| Height |
311mm |
| Length/Breadth/Depth |
100mm |
| Weight |
4400g |
The Multi Inverter Charger is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure.
Proven reliability
The full bridge plus toroidal transformer topology has proven its reliability over many years.
The inverter is short circuit proof and protected against overheating, whether due to overload or high ambient temperature.
PowerControl – Dealing with limited generator, shore side or grid power
With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded.
High start – up power
Needed to start high inrush loads such as power converters for LED lamps, halogen lamps or electric tools.
Search Mode
When Search Mode is ‘on’, the power consumption of the inverter in no-load operation is decreased by approx. 70%. In this mode the Multi, when operating in inverter mode, is switched off in case of no load or very low load, and switches on every two seconds for a short period. If the output current exceeds a set level, the inverter will continue to operate. If not, the inverter will shut down again.
Programmable relay
By default, the programmable relay is set as an alarm relay, i.e. the relay will de-energise in the event of an alarm or a pre-alarm (inverter almost too hot, ripple on the input almost too high, battery voltage almost too low).
Remote on / off / charger on
Three pole connector
VE.Bus: For parallel and three phase operation, remote monitoring and system integration RJ45-spliter ASS030065510 needed for 500/800/1200VA models)
 |
INSTALLATION TO AUSTRALIAN STANDARDS REQUIRED
- This product requires installation to the appropriate Australian Standards
- Various State legislations require a Licenced Electrician to install this item – Please consult your State Government websites for more information
- QLD Legislation imposes Point of Sale signage regulations for this product
|
For more information regarding the
Victron MultiPlus Inverter & SLA/LiFePO4 Charger 48V 500VA 6A -16A Transfer Switch PMP481500000 please contact us via any of the methods
available here or message us on
social media and we’ll be happy to assist!
