Description
MGW1200 Waterproof 4×4 Boating Jump Starter
Benefits
Features
Intelligent Jump Start Cable
The MGW1200’s intelligent jump start cables are constructed from heavy duty 8AWG cable and feature the latest safety features. The indicator light on the smart cables will show the state of the jump start.
These include
Red/Green Flash – Ready to Start
Red Light is on Before Jump Start – Reverse Polarity / Short Circuit / Battery is higher than 12.6 Volts – check for other starting issues
Red Light is on After Jump Start – Reverse Charging Protection
Red Light is Flashing Quickly – The temperature of the clamps is over 65ยฐC – Remove until the Red/Green lights flash
Green Light Flashes Slowly – Low Jump Starter Battery – Charge the Jump Starter
MGW1200 Powerbank outputs.
The MGW1200 is perfect to use as a power bank. It features an EC5 Jump start port which can be used for running 12 volt accessories, 2 x QC18 watt fast charging USB ports, a fast charging Type C+PD30 port.
EC5 port power supply
We have included 2 accessories that connect to the jump starters EC5 port. One is a 12 volt female cig socket connector. Use this connector to run 12 volt appliances that connect by a cig socket connection like fridges, LED lights, shower pumps or ever compressors. The second connector is a OBD memory saver. Use the OBD, On Board Diagnostic memory saver to maintain the vehicles computer memory when you wish to disconnect the vehicles battery. Plug the OBD into the MGR1200 and then connect it to the OBD port of your vehicle. The jump starter will maintain power to the computer system of your vehicle while you disconnect the vehicles battery for maintenance or repairs.
Type C PD 30 Watt
Use the Type C port for fast charging phones and devices. Capable of supplying up to 30 watts of power for charging larger devices. The MGW1200 kit also includes a Type C to Type C cable for this use. You can also fast charge the Jump Starter through this port using the included Type C to Type C cable and included 240 Volt AC charger.
QC18W USB x 2
The MGW1200 includes 2 x fast charging USB ports for charging of phones and devices. Capable of supplying 18 watts of power to keep those devices topped up.
Torch/Signaling light
The MGW1200 has a torch included that has 3 modes. A bright torch for general use, Strobe mode for warning of trouble ahead. This is especially good for slowing traffic in the case of an accident on the road or the like and the SOS mode which can be used to signal for help. The torch and on off switch are designed to be operated without compromising the water proof features of the MGW1200.
MGW1200 Charging
Specifications
Model | MGW1200 |
Capacity | 16000 mAh |
Micro USB input | 5V/2.1A |
Type C Input and Output | PD 30 Watt
5V/3A, 9V/3A, 12V/2.5A, 20V/1.5A |
USB 1 Output | 5V/3A, 9V/2A, 12V1.5A |
USB 2 Output | 5V/3A, 9V/2A, 12V1.5A |
Start Current | 600 Amp >1 sec |
Peak Current | 1200 Amp <0.2 sec |
Short Circuit Protection | Effective |
Over Discharge Protection | <=13V (+ – 0.3V) |
Over Temperature Protection | ย >65ยฐC (+ – 5ยฐC) |
ย Reverse Polarity Protection | ย Effective |
ย Reverse Charging Protection | ย >=12.6V (+ – 0.3V) |
ย Unit Dimensions | ย 198 x 98 x 45 mm |
In The Box
1. | MGW1200 Waterproof Jump Starter |
2. | Intelligent Jump Start Cables |
3. | EC5 to OBD11 Memory Saver |
4. | EC5 to Cig Socket Connector |
5. | AC Charger 18 Watt Type C and USB |
6 | Type C to Type C Cable |
7 | USB to Type C Cable |
8 | Operation Manual |