BlueSolar MPPT 250/70-Tr VE.Can
|BlueSolar 12V/24V/36V/48V 70A Solar Charge Controller MPPT Tr Type SCC125070441
BlueSolar MPPT 250/70-Tr VE.Can SCC125070441
BlueSolar Charge Controllers MPPT 250/70-Tr VE.Can
- 12V/24/V/36V/48V auto select battery voltage *software tool required for 36V
- 70A rated charge current
- 1000W @12V, 2000W @24V, 4000W @48V nominal PV power
- Automatic load disconnect
- 99% peak efficiency
- Reverse polarity (fuse) protection, output short circuit protection and over temperature protection
Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
Advanced Maximum Power Point Detection in case of partial shading conditions
If partial shading occurs, two or more maximum power points (MPP) may be present on the power-voltage curve.Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP.The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP.
Outstanding conversion efficiency
No cooling fan. Maximum efficiency exceeds 99%.
Flexible charge algorithm
Fully programmable charge algorithm (see the software page on our website), and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details).
Extensive electronic protection
Over-temperature protection and power derating when temperature is high.
PV short circuit and PV reverse polarity protection.
PV reverse current protection.
Internal temperature sensor
Compensates absorption and float charge voltage for temperature.
Optional external battery voltage and temperature sensing via Bluetooth
A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers.
Fully discharged battery recovery function
Will initiate charging even if the battery has been discharged to zero volts.
Will reconnect to a fully discharged Li-ion battery with integrated disconnect function.
For a wired data connection to a Color Control GX, other GX products, PC or other devices
To connect for example to a VE.BUS BMS.
Can be programmed (a.o. with a smartphone) to trip on an alarm, or other events.
Optional: LCD display
|INSTALLATION TO AUSTRALIAN STANDARDS REQUIRED
Please Note: Under the Australian Standards, a Licenced Electrician must install any electrical equipment that normally operates at a voltage greater than extra low voltage (ELV), that is, 50V AC or 120V ripple free DC in an electrical installation or is classified as DVC-B or DVC-C.
|Multi Chemistry Profiles Installed:
All Victron MPPT’s come standard with charge profiles for multiple chemistries, including Lithium, Lead and GEL, as well as the ability to program user defined profiles.
The default setting for Victron Energy MPPT’s is for Lead batteries, but charge profiles can be easily changed using the VictronConnect App. This BlueSolar MPPT will require a VE.Direct Bluetooth Smart Dongle, or a VE.Direct to USB Interface to access the VictronConnect App
For more information regarding the Victron BlueSolar MPPT 250/70-Tr VE.Can SCC125070441
please contact us via any of the methods available here
or message us on social media
and we’ll be happy to assist!