SmartSolar MPPT 150/100-Tr VE.Can
|Description||12V/24V/36V/48V 100A CAN-bus Smart Solar Charge Controller MPPT Type SCC115110411|
|Original Brand||Victron Energy SCC115110411|
Victron SmartSolar MPPT 150/100-Tr VE.Can up to 48V Charge Controller
The Victron SmartSolar MPPT 150/100-Tr VE.Can replaces discontinued SCC115110410
PV short circuit and PV reverse polarity protection.
PV reverse current protection.
|Click Here to view the SmartSolar Pluggable Display
A pluggable LCD display for the SmartSolar Charge Controllers
Fully discharged battery recovery function will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function.
|Victron Energy Support Links|
Not sure what type of Solar Charge controller you need?
Click the icon to read a helpful guide from Victron Energy called:
|INSTALLATION TO AUSTRALIAN STANDARDS REQUIRED
Please Note: Under the Australian Standards, a Licenced Electrician must install any electrical equipment that normally operates at a voltage greater than extra low voltage (ELV), that is, 50V AC or 120V ripple free DC in an electrical installation or is classified as DVC-B or DVC-C.
|Multi Chemistry Profiles Installed:
All Victron MPPT’s come standard with charge profiles for multiple chemistries, including Lithium, Lead and GEL, as well as the ability to program user defined profiles.
The default setting for Victron Energy Smartsolar MPPT’s is for Lead batteries, but charge profiles can be easily changed using the VictronConnect App via your Bluetooth connection.
VictronConnect lets you get live status information and configure the SmartSolar MPPT 150/100-Tr VE.Can via either Bluetooth or direct cable connection. Connect to Bluetooth equipped products, or non-Bluetooth equipped products using VE.Direct Bluetooth Smart Dongle. Connect directly to equipment using the VE.Direct to USB Interface (USB Type-A) or VE.Direct to Type C Interface (USB Type-C) cables.